128 Sunday Club Racing

Opposite Lock RC Sunday Club Racing

Every Sunday! Practice Starts at 10:00am. Racing Begins at 1:00pm.

We are a club level race track. Our goal is to have fun and be competitive. We base our rules from PN Racing's PNWC Rules with modifications to better suit the enjoyment of this hobby.

Each Driver should follow these rules for a fair experience for all.

Race Fees

$15.00 Dollars First Class. $5.00 Dollars Each Additional Class.

Classes

Beginner Kyosho Box Stock Mini Z
Expert Kyosho Box Stock Mini Z
Kyosho EVO 5600kv
PN RACING 2.5 AAA Stock Spec
GTLM Super Stock 2500kv
2WD Modified
4WD Modified

Beginner and Expert Box Stock Rules

Motor: Kyosho MZ9P and MZ9E Motor from RTR, allow change the motor wire and remove the safety switch.

Chassis: Kyohso MR03S, MR03S2 and MR03 RWD. Wheels: Kyosho or PN plastic wheels, Front 8.5mm x 20mm, Rear 11mmx20mm, offset must fit inside of the body.

Tire: Kyosho or PN rubber tire only Traction Compounds NOT allowed on tire or on race surface. Tire warmers are allowed. Tires may be cleaned with a 70% alcohol solution. If a driver uses tire cleaner that has been deemed illegal, the driver will be subject to any penalties that apply. Please address any questions concerning tire cleaners at the drivers meeting. Electronic & Transmitter: Aftermarket Transmitter allowed. Gyro and Receiver build in Gyro is not allowed.

Gear Ratio: Fixed 9T Pinion with Stock Gear Diff. Pinion - Kyosho or PN 400329 MR2709 only.

Wheelbase: 90mm to 102mm

Body: Kyosho original AutoScale body, white body, Jomurema GT01 body and TRP Scale body, all parts must be original from that body, limited wheel clearance modification allowed.

Batteries: Kyosho Speed House 800HV, Peak Racing 900HV, TRP747, TRP900, PN HP750, PN HP900 and Silver Horse 800, AAA NiMH 4pcs only.

Option Parts: Kyosho or PN Ball Bearing, wheel nut and T-Plate only.

Modifications: It must be run in stock configuration.

Kyosho EVO 5600kv

Kyosho based MR03 Chassis.

Motor: Kyosho Blue 5600kv Motor Only

Batteries: Kyosho Speed House 800HV, Peak Racing 900HV, TRP747, TRP900, PN HP750, PN HP900 and Silver Horse 800, AAA NiMH 4pcs only.

Tire: Kyosho or PN rubber tire only Traction Compounds NOT allowed on tire or on race surface. Tire warmers are allowed. Tires may be cleaned with a 70% alcohol solution.

PN Racing AAA Stock Spec

Chassis: Kyosho Mini-Z Racer MR01, MR015, MR02, MR03, MRC MR01 and PNR2.5W. 90mm-98mm wheel base only.

Body: Kyosho Mini-Z, TRP Scale and Jomurema GT01, GL 488 Lambo, Silver Horse R8 body only, LeMans body NOT allowed, full windshield and window must be installed, except for clearance, Lexan window and Lexan Roof allowed.

Motor: Brushless Sensorless 3500kv #160035WC, Fixed Gear ratio 64 Pitch 16 Pinion 53T Spur Gear

ESC: Kyosho ASF VE VE Pro MR03S RWD and EVO, Gyro and Receiver build in Gyro is not allowed.

Battery: Cars must be powered by four AAA batteries. Alkaline, Ni-MH or Ni-Cd batteries may be used. No other type of battery may be used. For example: Lithium Polymer may not be used. Additional battery for transponder allowed.

Option Parts: Any aftermarket brand Mini-Z production parts allowed, any homemade parts, 3D print option parts and prototype parts not allowed. Allowed 3D Print Transponder Holder, Body Side Clips, ESC Top Cover allowed.

Wheel: All brand Plastic and Aluminum Mini-Z production wheel rims are allowed. Maximum front wheel width is 8.5mm. Maximum rear wheel width is 11mm. Maximum wheel diameter is 19-20mm. All wheel rims must be original design made for Mini-Z RACER, any modification is not allowed, any slot-car design wheel and 3D print wheel not allowed.

Tire: Any Brand of Rubber Mini-Z production tire ONLY. Homemade tires, Foam tires, Silicon tires, Urethane tires, Ethyl Carbamate tires NOT allowed. No tire insert use. Traction compounds NOT allowed on tire or on race surface. Tire warmers are allowed. Tires may be cleaned with a 70% alcohol solution.

GTLM Super Stock

Chassis: Kyosho Mini-Z Racer MR01, MR015, MR02, MR03, Jomurema, GL Racing GLR, GLR-GT GL-GTR, MRC MR01, PNR2.5W, PNR3.0, RTRC RTA, Atomic MRZ MRZ Pro, NEXX Specter, Reflex RX28, G-Force Lightning and MWX R.1 GT

Body 90mm-98mm wheel base only. LM Body 102mm wheel base only. Full windshield and window must be installed, except for clearance, Lexan window and Lexan Roof allowed.

Motor: 2500kv. Fixed Gear ratio 64 Pitch 14 Pinion 53T Spur Gear.

ESC: OPEN any Sensored or Sensorless ESC. Gyro is not allowed.

Battery: 2S Li-Po battery, maximum 8.45V. Additional battery for transponder allowed.

Option Parts: Any aftermarket brand Mini-Z production parts allowed, any homemade parts, 3D print option parts and prototype parts not allowed. Allowed 3D Print Transponder Holder, Body Side Clips, ESC Top Cover allowed.

Wheel: All brand Plastic and Aluminum Mini-Z production wheel rims are allowed. Maximum front wheel width is 8.5mm. Maximum rear wheel width is 11mm. Maximum wheel diameter is 20mm. All wheel rims must be original design made for Mini-Z RACER, any modification is not allowed, any slot-car design wheel and 3D print wheel not allowed.

Tire: Any Brand of Rubber Mini-Z production tire ONLY. Homemade tires, Foam tires, Silicon tires, Urethane tires, Ethyl Carbamate tires NOT allowed. No tire insert use. Traction compounds NOT allowed on tire or on race surface. Tire warmers are allowed. Tires may be cleaned with a 70% alcohol solution.

Minimum Weight: Whole car with everything 160g.

2wd Modified

Chassis: Kyosho Mini-Z Racer MR01, MR015, MR02, MR03, Jomurema, GL Racing GLR GLR-GT GL-GTR, MRC MR01, PNR2.5W, PNR3.0, RTRC RTA, Atomic MRZ MRT MRZ Pro, NEXX Specter, Reflex RX28, G-Force Lightning and MWX R.1 94mm-98mm Wheel Base ONLY, No weight limit.

Motor: Open any Mini-Z size motor 130 Brushed or 1626 Brushless, Sensored or Sensorless.

ESC: Open any ESC Sensored or Sensorless. Gyro is not allowed.

Battery: 2S Li-Po battery. Additional battery for transponder allowed.

Option Parts: Any aftermarket brand Mini-Z production parts allowed. Any homemade parts, 3D print option parts and prototype parts NOT allowed. Allowed 3D Print Transponder Holder, Body Side Clips, ESC Top Cover allowed. Wheel: All brand Plastic and Aluminum rims are allowed. Maximum front wheel width is 11mm. Maximum rear wheel width is 14mm. Maximum wheel diameter is 21mm. All wheel rims must be original design made for Mini-Z RACER, any modification is not allowed, any slot-car design wheel and 3D print wheel NOT allowed. Tire: Any Brand of Rubber Mini-Z production tire ONLY. Homemade tires, Foam tires, Silicon tires, Urethane tires, Ethyl Carbamate tires NOT allowed. No tire insert use. Traction compounds NOT allowed on tire or on race surface. Tire warmers are allowed. Tires may be cleaned with a 70% alcohol solution.

Minimum Weight: No minimum weight limit.

4wd Modified

Chassis: AWD 94mm-98mm Wheel Base ONLY, No weight limit.

Motor: Open any Mini-Z size motor 130 Brushed or 1626 Brushless, Sensored or Sensorless.

ESC: Open any ESC Sensored or Sensorless. Gyro is not allowed.

Battery: 2S Li-Po battery. Additional battery for transponder allowed.

Option Parts: Open any parts allowed (including homemade parts, 3D print parts and prototype parts). Wheel: All brand Plastic and Aluminum rims are allowed. Maximum Front wheel width is 11mm. Maximum Rear wheel width is 14mm. Maximum wheel diameter is 20.5mm.

All wheel rims must be original design made for Mini-Z RACER, any modification is not allowed, any slot-car design wheel and 3D print wheel not allowed.

Tire: Any Brand of Rubber Mini-Z production tire ONLY. Homemade tires, Foam tires, Silicon tires, Urethane tires, Ethyl Carbamate tires NOT allowed. No tire insert use. Traction compounds NOT allowed on tire or on race surface. Tire warmers are allowed. Tires may be cleaned with a 70% alcohol solution.

Minimum Weight: No minimum weight limit.